TOOL BALANCERS / SPRING BALANCERS / AIR BALANCERS

spring operated tool balancers

SPRING OPERATED TOOL BALANCERS

Features include:

Adjustable capacity.

Stainless steel cable.
Safety device prevents the load from dropping in the event of spring failure.

Optionals include:

Latching device to hold the load a different levels.

Rotary hook.

Hose balancers also available.

Datasheet

spring operated hose balancer

SPRING OPERATED HOSE BALANCERS

air operated tool balancer

INGERSOLL RAND AIR BALANCER

The Ingersoll Rand air/pneumatic balancer can be used as a hoist but offering some 'float' so the operator can manually position a component.

As a tool balancer, the pendant control is removed and replaced by a pressure sensor that can be adjusted to equal out the load. This leaves the operator with a very easy to move tool that is accurately balanced.

Capacity: up to 227 kg *

Cable Length: 9144 mm (30 feet)

Stroke: 1 or 3 metres

* The full capacity is based on a 100 psi air supply, however, it can be used with a lower pressure. The capacity will reduce by 1% for every 1 psi below 100 psi.

Datasheet